1 877 SCUBA USA

 

              directions                dive club                  partners                 photo gallery                 forms                 dutch springs                 about us                our staff     

Home Recreational Technical Public Safety Leadership Travel Store DAN

      

ERD Student Manual $65

Recreational Vs Emergency Response Diving
Rescue Vs Recovery Diving
Equipment
Team Structure
Stress-Physical and Psychological
Pre-Dive Investigation & Scene Set Up
Interviews
Map Making
Preparation for the Operation
Signals
Search Patterns
Recovery
Post Dive
Emergency Procedures

Tender Manual $55

Contaminated Water Manual $55

 

Click to see Video  contact us for options, pricing or to see one. Toll FREE 1-877-SCUBA-USA

 

 
 
Toll Free 1-877-SCUBA-USA
(1-877-728-2287)

When Rescue is an Option

  • Built out of tough 1000 D fabric
  • Can be deployed from carrying bag to water in 30 seconds or less
  • 42 lbs of lift/Enough to lift 450 lbs safely to the waters surface
  • 13 Cu. ft tank air supply for primary system for rescuer/ 7 to 20 min air supply depending on proficiency
  • 3 Cu. ft tank for secondary system to pass to victim
  • No weights required system is aprox. 5 lbs negative
  • Optional 20 Cu. ft tank to be inverted on back of vest/ with quick release 1st stage valve
  • CO2 detonator for emergency situations
  • All hoses for 2nd stage and power inflator are hidden inside vest to reduce the chance of entanglement
  • 2 Large utility pockets for window punch and cutters
  • 3 large tender stainless steel D rings/ Plus two plastic & two smaller Stainless rings for leg harness
  • Mask & Bag/Unit fits in bag size of small briefcase & can be easily stowed in car or boat
  • Reflective tape strips on front and back of vest
  • Pressure button gauges on both primary and secondary tanks/ Fill adapter supplied with system
  • Life support regulators, gauges and tanks supplied by H2Odyssey

REDS SlideShow

Call for Public Safety Pricing Program

 
Toll Free 1-877-SCUBA-USA

(1-877-728-2287)

Redundant Air Supply

Redundancy is the Key to Safety

  • 19 cubic ft. 3000psi Cylinder

  • Pressure gauge to monitor air supply

  • Complete and Dependable Piston regulator

  • Positive attachment Sling with Fast and Easy release

The ultimate performance to value ratio.
Both the 1st and 2nd stages are low-profile, durable and lightweight. It has one high pressure port and four low pressure ports to accommodate most hose arrangements. The 1st and 2nd stage designs are easy to maintain and service, and are known by divers and technicians worldwide.
  • Conventional second stage without diver adjustment

  • Lightweight

  • Nitrox compatible to 40%

  • Rugged and dependable

A rugged instrument capable of providing accurate readings up to 5000 psi. This durable pressure gauge has a precision-coiled Bourdon tube for the most accurate pressure measurement available. With a luminous face for easy viewing in low light situations. Designed to provide years of reliable use.
  • 5,000 psi service

  • Temperature indicator

  • Low-air visual indicator

  • Luminescent gauge face absorbs light and glows approximately 7 times faster and longer than other materials

 

Pony Bottle Sling

- Bolt snap attachment design
- Easy grip haul handle
- Secure bottle neck lasso strap
- Fits 19-30 cu ft bottles

The most used valve in diving. The critical link between your regulator and tank, our patented Sherwood valve was designed specifically to handle today’s high-performance regulators.

  Redundant Air Supply $449.95 Includes ups in the lower 48 US's


If you work in a hazmat team or as a firefighter, you wear equipment that is safe and protects you. The idea of anything else doesn't make sense. Diving shouldn't be any different - divers too work in a hazardous environment.

Rescue and recovery divers can't choose where and when to dive and may be forced to dive in contaminated waters. Consequently, it is vitally important for them to use a suit that combines protection against hazardous waters with flexibility and comfort. A Viking Pro 1000 in combination with either a rubber or a latex hood and a sleeve ring system with attached dry gloves is one of the best alternatives available..

In conjunction with a positive-pressure full-face mask, you are well equipped even for diving in contaminated water.

Material: Black or Red EPDM/natural rubber (1,000 gr/m2), with a two-way stretch polyester lining.

The suit is fitted with rotating inlet and exhaust valve and heavy duty zipper. The inlet valve can be flexibly positioned on the chest. The suit is equipped with black integrated reinforcements from the foot over the knee to the seat. Boots are fitted with fin holders.

As an option, Viking Pro 1000 can be equipped with cargo pocket, cylinder pocket and/or knife pocket.

 

 


Sizes, Viking Pro 1000

Warning! Diving in contaminated water is extremely hazardous and requires special training. The diving supervisor has the full responsibility for the safety of the diver based on a risk assessment of the actual conditions at the dive site. When possible, diving in contaminated water should be avoided.


Click here for PSD Training Info and Calendar


AGA

The Interspiro line of diving full face masks (ffm) are second to none! All have been field proven by Government, Military, Commercial & Public Safety Teams around the world.

All the Interspiro full face masks featured here have been tested by the U.S. Navy Experimental Diving Unit (NEDU) and are Navy Approved.


The Future Has Arrived

Click for more information

The HUD project was conducted under a joint-development project with the U.S. Navy's Coastal Systems Station (CSS) - Panama City, Florida. The HUD contains a miniature liquid crystal display (LCD) panel, multi-element optics, microprocessor, depth transducer, wireless cylinder pressure receiver, diver replaceable battery, and controlling software - all built directly into a dive mask. The miniature LCD displays the diver's depth, bottom time, and cylinder pressure. The multi-element optical lens provides a clear, highly magnified image of the LCD, which is viewable regardless of environmental conditions.

Oceanic's wireless transmitter module attaches to the regulator first stage and transmits the diver's cylinder pressure to the mask.

 

Turtle Fin, Are the Original Jet and Rocket Fin

 - Vented design. Reduces drag on the upstroke; improves thrust on the downstroke.
 - Adjustable and secure strap.
 - Easy pre-dive prep.

Mask and Fin Package $149.95 Includes UPS Ground

Model type: LB-50D
50lb. lift bag
$44.95

Model type: LB-100D
100lb. lift bag
$49.95

* Nylon heat sealed material
* Dump valve with attached pull ball
* Brass clip
* Velcro, to roll up
Toll Free 1-877-SCUBA-USA
Toll Free 1-877-728-2287

Next ERD1Course October 2010

Email us for ERD1 Course info


1 877 SCUBA USA

480 N RT-17 Paramus, NJ 07652

Toll FREE 1- 877- 728- 2287

               Click here for PSD Training Info and Calendarming soon

at

 

 

 

Join us at a Meet-Up

     

Meetup

Membership has its privileges!

 

 

DAN Divers Alert Network - Scuba Diving and Dive Safety Association

 

 

         staff resources          |            dive club            |            nj diving          |          meetup          |          forms        |           scubility      |        contact us          |            FAQ's       

      © Copyright 2009        1877Scuba USA      All rights reserved.